twamp (Security ALG)
Statement introduced in Junos OS Release 18.2R1.
Specify the Two-Way Active Measurement Protocol (TWAMP) Application Layer Gateway (ALG) on the device. The TWAMP ALG extracts the IP addresses and the port details from messages between the control client and the TWAMP server and performs IP translation and gate opening to permits the test sessions. The TWAMP ALG also performs the message sanity check. By default, the TWAMP ALG is disabled. To enable, you need to configure the TWAMP ALG at [edit security alg twamp] hierarchy level.
Required Privilege Level
system—To view this statement in the configuration.
interface-control—To add this statement to the configuration.