robust-count (IGMP Snooping)
Statement introduced in Junos OS Release 8.5.
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Statement introduced in Junos OS Release 18.1R1 for the SRX1500 devices.
Configure the number of queries a device sends before removing a multicast group from the multicast forwarding table. We recommend that the robust count be set to the same value on all multicast routers and switches in the VLAN.
This option provides fine-tuning to allow for expected packet loss on a subnet. You can wait more intervals if subnet packet loss is high and IGMP report messages might be lost.
Use the query-interval, query-last-member-interval, or query-response-interval statements in the same hierarchy to configure interval lengths.
number—Number of intervals the switch waits before timing out a multicast group.
Range: 2 through 10
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.