retransmit-interval (OSPF)
Syntax
retransmit-interval seconds;
Hierarchy Level
[edit logical-systems
logical-system-name protocols ospf area
area-id peer-interface interface-name],
[edit logical-systems
logical-system-name protocols (ospf | ospf3) area
area-id interface interface-name],
[edit logical-systems
logical-system-name protocols (ospf | ospf3) area
area-id virtual-link],
[edit logical-systems
logical-system-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)
area
area-id interface interface-name],
[edit logical-systems
logical-system-name routing-instances
routing-instance-name protocols
(ospf | ospf3) area
area-id interface interface-name],
[edit logical-systems
logical-system-name routing-instances
routing-instance-name protocols
(ospf | ospf3) area
area-id virtual-link],
[edit logical-systems
logical-system-name routing-instances
routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area
area-id interface interface-name],
[edit protocols (ospf | ospf3) area
area-id interface interface-name],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast
| ipv6-multicast) area
area-id interface interface-name],
[edit routing-instances
routing-instance-name protocols (ospf | ospf3) area
area-id interface interface-name],
[edit routing-instances
routing-instance-name protocols (ospf | ospf3) area
area-id virtual-link],
[edit routing-instances
routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)
area
area-id interface interface-name]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the realm statement introduced in Junos
OS Release 9.2.
Support for the realm statement introduced in Junos
OS Release 9.2 for EX Series switches.
Description
Specify how long the routing device waits to receive
a link-state acknowledgment packet before retransmitting link-state
advertisements (LSAs) to an interface’s neighbors.
Options
seconds—Interval
to wait.
Range: 1 through 65,535 seconds
You must configure LSA retransmit intervals to be equal
to or greater than 3 seconds to avoid triggering a retransmit
trap, because Junos OS delays LSA acknowledgments by up to 2 seconds.
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement to the configuration.
