report-ingress-shaping-rate (Dynamic CoS Interfaces)
Statement introduced in Junos OS Release 17.2.
Report the ingress shaping rate in bits per second that is used as the receive speed (Rx) for the LAC to send to the LNS. The ingress shaping rate is used when the method for deriving the connect speed is configured as service-profile with the tx-connect-speed statement at the [edit services l2tp] hierarchy level.
This statement is supported only when the effective shaping-rate statement is included at the [edit chassis] hierarchy level. If it is not, the subscriber login fails and a system log message is generated. There is no commit check failure because a commit check cannot be performed at run time.
Range: 1000 through 6,400,000,000,000 (6.4Tbps)
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.