Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

relay-source

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 16.1.

Description

Configure DHCP relay server to use the configured loopback address as the source address in both the IP header and in DHCP messages relayed to the server.

In network configurations where a firewall on the broadband network gateway (BNG) is between the DHCP relay agent and the DHCP server, only the BNG loopback address passes through the BNG firewall. In that case, DHCP unicast packets do not pass through the firewall and are discarded. This configuration statement places the loopback address in IP headers and DHCP messages, which enables DHCP unicast packets to pass through the firewall to the DHCP server.

Options

interface-nameSpecify the loopback interface. The interface-name must belo0.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.