Statement introduced in Junos OS Release 9.6.
Statement and mode, source-list, and translate options introduced in Junos OS Release 18.3R1 for EX4300 switches (ELS switches).
Statement and mode, source-list, and translate options added in Junos OS Release 18.4R1 for EX2300 and EX3400 switches (ELS switches).
Configure a VLAN as a multicast receiver VLAN of a multicast source VLAN (MVLAN) using the multicast VLAN registration (MVR) feature.
You must associate an MVR receiver VLAN with at least one data-forwarding source MVLAN. You can configure an MVR receiver VLAN with multiple source MVLANs using the source-list or source-vlans statement.
The remaining statements are explained separately.
The mode, source-list, and translate statements are only applicable to MVR configuration
on EX Series switches that support the Enhanced Layer 2 Software
(ELS) configuration style.
The source-vlans statement is applicable only to EX Series switches that do not support ELS, and is equivalent to the ELS source-list statement.
See CLI Explorer.
MVR not enabled
You cannot configure the install option for a data-forwarding receiver VLAN that is configured in proxy mode (see the MVR mode option). In MVR transparent mode, by default, the device installs bridging entries only on the MVLAN for a multicast group, so upon receiving MVR receiver VLAN traffic for that group, the switch doesn’t forward the traffic to receiver ports on the MVR receiver VLAN that sent the join message for that group. The traffic is only forwarded on the MVLAN to MVR receiver interfaces. Configure this option when in transparent mode to enable MVR receiver VLAN ports to receive traffic forwarded on the MVR receiver VLAN.
We recommend you set this option for MVR receiver VLANs with trunk ports, so hosts on the trunk interfaces receive multicast traffic tagged with the expected VLAN ID (the MVR receiver VLAN ID).
Required Privilege Level
routing—To view this statement in the
routing-control—To add this statement to the configuration.