qualified-next-hop (Static Routes)
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Configure a static route with multiple possible next hops, each of which can have its own preference value, IGP metric that is used when the route is exported into an IGP, and Bidirectional Forwarding Detection (BFD) settings. If multiple links are operational, the one with the most preferred next hop is used. The most preferred next hop is the one with the lowest preference value.
address—IPv4, IPv6, or ISO network address of the next hop.
interface-name—Name of the interface on which to configure an independent metric or preference for a static route. To configure an unnumbered interface as the next-hop interface for a static route, specify qualified-next-hop interface-name, where interface-name is the name of the IPv4 or IPv6 unnumbered interface.
For an Ethernet interface to be configured as the qualified next hop for a static route, it must be an unnumbered interface.
To configure an Ethernet interface as an unnumbered interface, configure the unnumbered-address <interface-name> statement at the [edit interfaces <interface-name> unit <logical-unit-number> family <family-name>] hierarchy level as described in Configuring an Unnumbered Interface.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.