preference (Protocols MPLS)
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.3X50 for the QFX Series.
Preference for the route.
You can optionally configure multiple LSPs between the same pair of ingress and egress routers. This is useful for balancing the load among the LSPs because all LSPs, by default, have the same preference level. To prefer one LSP over another, set different preference levels for individual LSPs. The LSP with the lowest preference value is used. The default preference for LSPs is lower (more preferred) than all learned routes except direct interface routes.
preference—Preference to assign to the route. A route with a lower preference value is preferred.
Range: 1 through 255
Default: 5 for static MPLS LSPs, 7 for RSVP MPLS LSPs, 9 for LDP MPLS LSPs
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.