pppoe-options
Syntax
pppoe-options {
access-concentrator name ;
auto-reconnect seconds;
(client | server);
ignore-eol-tag;
service-name name;
underlying-interface interface-name;
}
Hierarchy Level
[edit interfaces pp0 unit logical-unit-number],
[edit logical-systems logical-system-name interfaces pp0 unit logical-unit-number]
Release Information
Statement modified in Junos OS Release 12.3X48 to include ignore-eol-tag statement.
Description
Configure PPP over Ethernet-specific interface properties.
Options
access-concentrator name—(SRX Series devices with Point-to-Point
Protocol over Ethernet (PPPoE) interfaces) Configure the name of the
access concentrator. If you configure a specific access concentrator
name on the client and the same access concentrator name server is
available, then a PPPoE session is established. If there is a mismatch
between the access concentrator names of the client and the server,
the PPPoE session gets closed.
auto-reconnect seconds—Configure the amount of time to wait before reconnecting
after a session has terminated.
client —Configure the
device to operate in the PPPoE client mode.
idle-timeout seconds—Configure the maximum time that a session can be idle.
ignore-eol-tag—Disable
the
End-of-List
tag to process the tags
after the End-of-List
tag in a PPPoE Active
Discovery Offer (PADO) packet. service-name name—Configure the service to be requested from the PPP
over Ethernet server; that is, the access concentrator. For example,
you can use this statement to indicate an Internet service provider
(ISP) name or a class of service.
server—Configure the
device to operate in the PPPoE server mode.
underlying-interface interface-name—Configure the interface on which PPP over
Ethernet is running.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.