pp0 (Dynamic PPPoE)
Syntax
pp0 {
unit logical-unit-number {
keepalives interval seconds;
aaa-options aaa-options-name;
authentication [ authentication-protocols ];
initiate-ncp (ip | ipv6 | dual-stack-passive)
mru size;
mtu (size | use-lower-layer);
pap;
}
}
}
Hierarchy Level
[edit dynamic-profiles profile-name interfaces]
Release Information
Statement introduced in Junos OS Release 10.1.
Description
Configure the dynamic PPPoE logical interface in a dynamic profile. When the router creates a dynamic PPPoE logical interface on an underlying Ethernet interface configured with PPPoE (ppp-over-ether) encapsulation, it uses the information in the dynamic profile to determine the properties of the dynamic PPPoE logical interface.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
For information about creating static PPPoE interfaces, see Configuring PPPoE