Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

pic

 

List of Syntax

Syntax (EX4600, OCX1100, QFX Series, QFabric system with ELS)

Syntax (EX4600, QFX Series, QFabric system)

Syntax (EX4600, OCX1100, QFX Series, QFabric system with ELS)

Syntax (EX4600, QFX Series, QFabric system)

Hierarchy Level (EX4600, OCX1100, QFX Series, QFabric system with ELS)

Hierarchy Level (EX4600, QFX Series, QFabric system)

Release Information

Statement introduced in Junos OS Release 11.1 for the QFX Series.

Options xe and xle introduced in Junos OS 12.2X50-D20 for the QFX Series.

Option channel-speed introduced in Junos OS Release 13.2 for the QFX Series.

Description

(QFX3500, QFX3600, and QFX5100 standalone switches running Enhanced Layer 2 Software only)—Configure a specific port or a range of ports to operate as 10-Gigabit Ethernet ports or 40-Gigabit Ethernet ports.

Enable the specified port on the Physical Interface Card (PIC) to perform in the specified operating mode.

Options

pic pic-number(QFX3500 standalone switch only) Number of the physical interface card (PIC) on which you want to configure port types. Specify 1 to configure 10-Gigabit Ethernet or 40-Gigabit Ethernet type ports.

(QFX3600 standalone switch only) Number of the physical interface card (PIC) on which you want to configure port types. Specify 0 to configure 10-Gigabit Ethernet or 40-Gigabit Ethernet type ports.

port physical-port-numberPort number on which you want to configure the port type.
port-rangeport-range-lowLowest-numbered port in the range of ports.
port-rangeport-range-highHighest-numbered port in the range of ports.
channel-speed (speed |disable-auto-speed-detection) Configure 10g for 10-Gigabit Ethernet type ports, and configure disable-auto-speed-detection) to disable auto-channelization.
Note

This statement is not supported on the OCX Series.

  • On a QFX3500 switch, specify 0 if the port type is fiber-channel, and 2 if the port type is xle.

  • On a QFX3600 switch, specify 0 if the port type is xe, and 1 if the port type is xle.

  • On a QFX5100 switch, specify 0 if the port type is xe, and 1 if the port type is xle and fte.

The remaining statements are explained separately. See CLI Explorer.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.