Statement introduced in Junos OS Release 9.4 for EX Series switches.
Enable the specified port of the SFP+ uplink module to perform in the operating mode specified by pic-mode. The port is indicated by a Physical Interface Card (PIC) number.
For generic routing encapsulation (GRE) tunneling, use the pic statement with the tunnel-port statement to specify the number of the port on the switch that you want to convert to a GRE tunnel port.
pic-number—Number of the PIC. For built-in ports on EX3200, EX4200, EX4500, and EX4550 switches and on EX6200 and EX8200 switches, the PIC number is 0. For uplink ports on EX3200 and EX4200 switches, the PIC number is 1. On EX4500 switches, the PIC number is 1 for ports on the left-hand uplink module and 2 for ports on the right-hand uplink module. On EX4550 switches, the PIC number is 1 for ports in the expansion module installed in the module slot on the front panel of the switch and 2 for those in the expansion module installed in the module slot on the rear panel of the switch.
Configuration of an uplink port on an EX4500 or EX4550 switch as a GRE tunnel port is not supported
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the
interface-control—To add this statement to the configuration.