pcc-rules (PCEF Profile)

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 17.1.

Support at the [edit services pcef profiles profile-name static-policy-control] hierarchy level introduced for Junos OS Broadband Subscriber Management in Junos OS Release 17.2 on MX Series.

Support at the [edit services pcef profiles profile-name dynamic-policy-control] hierarchy level introduced for Junos OS Broadband Subscriber Management in Junos OS Release 18.2R1 on MX Series.

Description

Specify the policy and charging control (PCC) rules for a policy and charging enforcement function (PCEF) profile and assign a precedence to each PCC rule. You can configure up to 32 PCC rules in a PCEF profile.

If you are using Junos OS Subscriber Aware, specify the PCC rules at the [edit unified-edge pcef profiles profile-name (aaa-policy-control | dynamic-policy-control | static-policy-control) hierarchy level.

If you are using Junos OS Broadband Subscriber Management, specify the PCC rules at the [edit services pcef profiles profile-name (static-policy-control | dynamic-policy-control)] hierarchy level.

Options

rule-name—Name of the PCC rule. The referenced PCC rule must be configured.

precedence number—Use the specified precedence value assigned to a PCC rule. A lower precedence value indicates a higher precedence.

Range: 1 through 65,535

time-of-day-profile profile-name—(Optional; only applies to rules in static PCEF profiles for Junos OS Subscriber Aware) Use the specified name of the time-of-day profile to apply to the PCC rule. The referenced profile must already be defined at the [edit unified-edge pcef] hierarchy level. The time-of-day profile specifies the time of day, day of the week, or day of the month to activate or deactivate the PCC rule for subscribers assigned to the PCEF profile.

Required Privilege Level

For Junos OS Subscriber Aware:

unified-edge—To view this statement in the configuration.

unified-edge-control—To add this statement to the configuration.

For Junos OS Broadband Subscriber Management:

services—To view this statement in the configuration.

services–control—To add this statement to the configuration.