Statement introduced before Junos OS Release 7.4.
Configure the CCC switch for a point-to-multipoint LSP on the egress PE router.
point-to-multipoint-switch-name—Point-to-multipoint CCC receive switch name.
output-interface interface-name.unit-number—Name of the egress interfaces for the point-to-multipoint LSP traffic. You can configure multiple output interfaces.
receive-p2mp-lsp receiving-point-to-multipoint-lsp—Name of the point-to-multipoint LSP that is switched to the output interface.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.