Statement introduced in Junos OS Release 11.1R1.
Statement introduced in Junos OS Release 12.3X50 for the QFX Series.
Delays the switch over of LSPs to newly optimized paths. You only need to configure this statement on routers acting as the ingress for the affected LSPs (you do not need to configure this statement on transit or egress routers). The specified delay helps to ensure that the new optimized paths have been established before traffic is switched over from the old paths.
Default: 1 second
Range: 1 through 900 seconds
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.