Statement introduced before Junos OS Release 7.4.
alarm option and warning options introduced in Junos OS Release 10.0.
Statement and tx-power option introduced in Junos OS Release 13.2 for PTX Series routers.
tca option introduced in Junos OS Release 14.2 for PTX Series routers.
los-alarm-threshold and los-alarm-warning options introduced in Junos OS Release 14.2.
loopback option introduced in Junos OS Release 19.2R1 for QSFP-100GE-DWDM2 transceiver on MX10003, MX10008, MX10016, and MX204 routers.
For 10-Gigabit Ethernet or 100-Gigabit Ethernet dense wavelength-division multiplexing (DWDM) interfaces only, configure full C-band International Telecommunication Union (ITU)-Grid tunable optics.
On the PTX Series routers, when an interface is configured in 8QAM mode, you must configure both the optics from a AC400 module with the same optics-options for the links to come up.
loopback—Displays the electrical loopback status of QSFP-100GE-DWDM2 transceiver on MX10003, MX10008, MX10016, and MX204 routers.
los-alarm-threshold—Specify the Loss of Signal (LOS) threshold above which an alarm is raised.
los-warning-threshold—Specify the Loss of Signal (LOS) threshold above which a warning is issued.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.