Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

multicast-replication

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 15.1 for MX Series routers.

evpn stanza introduced in Junos OS Release 17.3R3 for QFX Series switches.

Description

Configure the mode of multicast replication that helps to optimize multicast latency.

Note

The multicast-replication statement is supported only on platforms with the enhanced-ip mode enabled.

Default

This statement is disabled by default.

Options

Note

The ingress and local-latency-fairness options do not apply to EVPN configurations.

ingressComplete ingress replication of the multicast data packets where all the egress Packet Forwarding Engines receive packets from the ingress Packet Forwarding Engines directly.
local-latency-fairnessComplete parallel replication of the multicast data packets.
evpn irb local-onlyEnables IPv4 inter-VLAN multicast forwarding in an EVPN-VXLAN network with a collapsed IP fabric, which is also known as a edge-routed bridging overlay.
evpn irb local-remoteEnables IPv4 inter-VLAN multicast forwarding in an EVPN-VXLAN network with a two-layer IP fabric, which is also known as a centrally-routed bridging overlay.
Note

Selective multicast forwarding is only supported with local-remote.

Default: evpn irb local-remote

smet-nexthop-limit smet-nexthop-limitConfigures a limit for the number of SMET next hops for selective multicast forwarding. SMET next hops is a list of outgoing interfaces used by a PE device in selectively replicating and forwarding multicast traffic. When this limit is reached, no new SMET next hop is created and the PE device will send the new multicast group traffic to all egress devices.

Range: 10,000 through 40,000

Default: 10,000

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.