monitor (Protocols BMP)
Statement introduced in Junos OS Release 13.2X51-D15 for the QFX Series.
Statement introduced in Junos OS Release 13.3.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
BMP monitoring is enabled by default. You can explicitly enable BMP monitoring or disable it. You can also selectively enable or disable BMP monitoring at various hierarchy levels (for example, [edit protocols bgp group group-name] or [edit protocols bgp group group-name neighbor address]). If you disable BMP monitoring, withdrawal messages are sent for any previously advertised routes. These are followed by a down message. If you enable BMP monitoring, an up message is sent first and then the route advertisements follow.
Default: BMP monitoring is enabled by default.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.