Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

max-sessions-vsa-ignore (Static and Dynamic Subscribers)

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 11.4.

Description

Configure the router to ignore (clear) the value returned by RADIUS in the Max-Clients-Per-Interface Juniper Networks vendor-specific attribute (VSA) [26-143], and restore the PPPoE maximum session value on the underlying interface to the value configured in the CLI with the max-sessions statement. The PPPoE maximum session value specifies the maximum number of concurrent static or dynamic PPPoE logical interfaces (sessions) that the router can activate on the PPPoE underlying interface, or the maximum number of active static or dynamic PPPoE sessions that the router can establish with a particular service entry in a PPPoE service name table.

Default

If you do not include the max-sessions-vsa-ignore statement, the maximum session value returned by RADIUS in the Max-Clients-Per-Interface VSA takes precedence over the PPPoE maximum session value configured with the max-sessions statement.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.