mac-radius

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 9.3 for EX Series switches.

flap-on-disconnect introduced in Junos OS Release 9.4.

Statement introduced in Junos OS Release 14.1X53-D30 for the QFX Series.

Description

Configure MAC RADIUS authentication for specific interfaces. MAC RADIUS authentication allows LAN access to permitted MAC addresses. When a new MAC address appears on an interface, the device consults the RADIUS server to check whether the MAC address is a permitted address. If the MAC address is configured on the RADIUS server, the device is allowed access to the LAN.

If MAC RADIUS is configured, the device first tries to get a response from the host for 802.1X authentication. If the host is unresponsive, the device attempts to authenticate using MAC RADIUS.

To restrict authentication to MAC RADIUS only, use the restrict option. In restrictive mode, all 802.1X packets are eliminated and the attached device on the interface is considered a nonresponsive host.

Options

flap-on-disconnect—(Optional) When the RADIUS server sends a disconnect message to a supplicant, the device resets the interface on which the supplicant is authenticated. If the interface is configured for multiple supplicant mode, the device resets all the supplicants on the specified interface. This option takes effect only when the restrict option is also set.

restrict—(Optional) Restricts authentication to MAC RADIUS only. When mac-radius restrict is configured, the device drops all 802.1X packets. This option is useful when no other 802.1X authentication methods, such as guest VLAN, are needed on the interface, and eliminates the delay that occurs while the switch determines that a connected device is a non-802.1X-enabled host.

The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.