local-port-range

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 17.1.

Support at the [edit services pcef flow-descriptions flow-identifier] hierarchy level introduced for Junos OS Broadband Subscriber Management in Junos OS Release 17.2 on MX Series.

Description

Specify the port range to identify the subscriber traffic that you want the service data flow (SDF) filter to detect.

Note

You can specify either local-port-range or a list of ports with local-ports, but not both.

If you are using Junos OS Subscriber Aware, specify the port range at the [edit unified-edge pcef flow-descriptions flow-identifier] hierarchy level.

If you are using Junos OS Broadband Subscriber Management, specify the port range at the [edit services pcef flow-descriptions flow-identifier] hierarchy level.

Default

If the local-port-range statement is not configured, the default is any range of local ports.

Options

low-value— Lower boundary for the port range.

Range: 1 through 65,535

high-value — Upper boundary for the port range.

Range: 1 through 65,535

Required Privilege Level

For Junos OS Subscriber Aware:

unified-edge—To view this statement in the configuration.

unified-edge-control—To add this statement to the configuration.

For Junos OS Broadband Subscriber Management:

services—To view this statement in the configuration.

services–control—To add this statement to the configuration.