ip-address (Port Mirroring)
Statement introduced in Junos OS Release 14.1X53.
Specify the IP address to which traffic should be mirrored (the IP address of the analyzer system). The device can be on a remote network. The analyzer device must be able to de-encapsulate GRE-encapsulated packets, or the GRE-encapsulated packets must be de-encapsulated before reaching the analyzer device. (You can use a network sniffer to de-encapsulate the packets.) This statement is not supported on QFabric systems.
An output IP address cannot be in the same subnetwork as any of the switch’s management interfaces.
If you create virtual routing instances and also create an analyzer configuration that includes an output IP address, the output address belongs to the default virtual routing instance (inet.0 routing table).
Required Privilege Level
routing—To view this statement in the
routing-control—To add this statement to the configuration.