Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

interface (Protocols Layer 2 Circuit)

 

Syntax

Hierarchy Level

Release Information

Statement introduced before Junos OS Release 7.4.

flow-label-receive-static and flow-label-transmit-static options introduced in Junos OS Release 14.1.

Description

Interface over which Layer 2 circuit traffic travels.

Options

interface-nameName of the interface to configure.
Note

The commit operation fails, if the same logical interface is configured for both layer 2 circuit and ccc connection.

connection-protectionEnable end-to-end protection through OAM failure detection.
flow-label-receiveAdvertise capability to pop flow label in receive direction to the remote provider edge (PE) device.
flow-label-receive-staticPop flow label on the pseudowire packets received from the remote PE device. The ingress PE inserts the flow label in the pseudowire packet, irrespective of the information exchanged in the signaling plane. If the egress PE cannot handle the pseudowire packet marked with the flow label, the packet is dropped.
flow-label-transmit Advertise capability to push flow label in transmit direction to the remote PE device.
flow-label-transmit-staticPush flow label on the pseudowire packets sent to the remote PE device. If the incoming pseudowire packet is not marked with the flow label, the packet is dropped by the egress PE.

The remaining statements are explained separately. See CLI Explorer.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.