l2circuit-control-passthrough

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 17.4R1 for PTX Series routers.

Description

Configure the device to allow LACP, LLDP, OAM LFM, and OAM CFM packets to cross the Layer 2 circuit. If the l2circuit-control-passthrough statement is not configured, LACP, LLDP, OAM LFM, and OAM CFM packets are classified as control packets and are not transmitted across the Layer 2 circuit.

Note

For MX Series routers, the functionality that the l2circuit-control-passthrough command provides is performed automatically.

Default

By default, this statement is not configured.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.