flag (Tracing for Origin AS Validation)
Statement introduced in Junos OS Release 12.2.
Configure the flags for tracing resource public key infrastructure (RPKI) BGP route validation.
all—Trace all events.
error—Trace errored packets.
keepalive— RPKI-to-router protocol keepalive messages. If you enable the BGP update flag only, received keepalive messages do not generate a trace message.
nsr-synchronization— Nonstop routing synchronization events. (Not valid at [edit routing-options validation group group-name session address].
packets—All incoming and outgoing packets.
policy—Policy processing. (Not valid at [edit routing-options validation group group-name session address].
task—Routing protocol task processing.
timer—Routing protocol timer processing.
update—Update packets. These packets provide routing updates to BGP systems. If you enable only this flag, received keepalive messages do not generate a trace message. Use the keepalive flag to generate a trace message for keepalive messages.
detail—Provide detailed trace information.
receive—Trace the packets being received.
send—Trace the packets being transmitted.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.