The ethernet-switching statement and all of its substatements are not supported on OCX Series switches.
Statement introduced in Junos OS Release 11.1.
Configure protocol family information for the logical interface on the QFX Series and OCX Series product.
The ethernet-switching statement and all of its substatements are not asupported on OCX Series switches.
Access interfaces on the QFX Series are set to family ethernet-switching by default. If you are going to change the family setting for an interface, you might have to delete this default setting or any user-configured family setting first.
You must configure a logical interface to be able to use the physical device.
Interface types on the switch are:
Aggregated Ethernet (ae)
Gigabit Ethernet (ge)
Management Ethernet (me0)
Routed VLAN interface (RVI) (vlan)
Routed VLAN interfaces, also referred to as integrated routing and bridging (IRB) interfaces, are not supported on OCX Series switches.
10-Gigabit Ethernet (xe)
Not all interface types support all family substatements. Check your switch CLI for supported substatements for a particular protocol family configuration.
Required Privilege Level
interface—To view this statement in the
interface-control—To add this statement to the configuration.