excess-rate (Dynamic Traffic Shaping)
Statement introduced in Junos OS Release 10.2.
For an MPC interface, determine the percentage or proportion of excess bandwidth traffic to share for all priorities of traffic.
percentage—Percentage of the excess bandwidth to share.
Range: 0 through 100 percent
value—Proportion of the excess bandwidth to share.
Range: 0 through 1000
The proportion of excess bandwidth on MPC2-3D MPCs can be configured with increments of 1 from 0 through 1000. All other MPCs should be configured with increments of 10 from 0 through 1000.
$junos-cos-excess-rate—Variable for the excess rate that is specified for the logical interface. The variable is replaced with a value obtained from the RADIUS server when a subscriber authenticates over the interface to which the dynamic profile is attached.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.