Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

ether-options

 

List of Syntax

Junos OS Syntax

Junos OS Evolved Syntax

Junos OS Syntax

Junos OS Evolved Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 9.0.

autostate-exclude option introduced in Junos OS Release 14.1x53-D40 for QFX5100 switches only.

fec and loopback-remote options introduced in Junos OS Evolved Release 20.1R1.

Description

Configure ether-options properties for a Gigabit Ethernet or 10-Gigabit Ethernet interface.

In Junos OS Evolved, when you configure set interfaces interface ether-options 802.3ad ae name at the same time as you apply a second configuration to the same interface at the [edit interfaces interface] hierarchy, the second configuration will not take effect until the interface joins the aggregated Ethernet interface ae name.

Note

The ether-options statement is not supported for subscriber management on aggregated Ethernet member link interfaces. You must configure gigether-options instead.

Table 1 shows the supported and unsupported platforms.

Table 1: Supported Platform Information

Supported Platforms for gigether-options

Supported Platforms for

ether-options

Notes

ACX Series Routers (Junos OS)

  • ACX500

  • ACX710

  • ACX1000

  • ACX1100

  • ACX2100

  • ACX2200

  • ACX4000

  • ACX5400

  • ACX5448

  • ACX5048

  • ACX5096

ACX Series Routers (Junos OS)

  • ACX5048

  • ACX5096

To configure storm control on the ACX Series routers, use ether-options.

EX Series Switches (Junos OS)

  • EX2300

  • EX2300 Multigigabit

  • EX2300-C

  • EX3400

  • EX4300

  • EX4300 Multigigabit

  • EX4600

  • EX4650

  • EX9200

  • EX9250

EX Series Switches (Junos OS)

  • EX2300

  • EX2300 Multigigabit

  • EX2300-C

  • EX3400

  • EX4300

  • EX4300 Multigigabit

  • EX4600

  • EX4650

  • EX9200

  • EX9250

EX Series Switches (Junos OS)

EX Series switches support both ether-options and gigether-options.

To configure Ethernet configuration options such as loopback, flow-control, auto-negotiation etc., use ether-options.

To configure Forward Error Correction (FEC), use gigether-options.

MX Series Routers (Junos OS)

  • MX5

  • MX10

  • MX40

  • MX80

  • MX104

  • MX150

  • MX204

  • MX240

  • MX480

  • MX960

  • MX20008

  • MX2010

  • MX2020

  • MX10003

  • MX10008 and MX10016

Not Supported

None

PTX Series Routers (Junos OS)

  • PTX1000

  • PTX3000

  • PTX5000

  • PTX10001

  • PTX10002

  • PTX10008 and PTX10016

PTX Series Routers (Junos OS)

  • PTX1000

  • PTX10001

  • PTX10002

  • PTX10008 and PTX10016

PTX Series Routers (Junos OS)

In Junos OS Release 17.3R3S7, PTX1000 Series routers support both ether-options and gigether-options.

In Junos OS Releases 17.3R1, 17.4R1, and 17.4R2, PTX10000 Series routers support both ether-options and gigether-options.

In Junos OS Release 18.1R1 and later, PTX Series routers support only gigether-options for your configuration and do not support ether-options. Before Junos OS Release 18.1R1, PTX Series support ether-options. See TSB17864 for additional information.

PTX Series routers (Junos OS Evolved)

  • PTX10003

  • PTX10008 and PTX10016

PTX Series routers (Junos OS Evolved)

  • PTX10003

  • PTX10008 and PTX10016

PTX Series routers (Junos OS Evolved)

Starting in Junos OS Evolved Release 20.1R1, PTX Series routers support ether-options only.

Before Junos OS Evolved Release 20.1R1, PTX Series routers supported gigether-options only.

QFX Series Switches (Junos OS)

  • QFX5100 (48S)

  • QFX5100 (48T)

  • QFX5100 (24Q)

  • QFX5100 (96S)

  • QFX5110 (48S)

  • QFX5110 (32Q)

  • QFX5120 (48Y)

  • QFX5120 (48T)

  • QFX5120 (48ym)

  • QFX5120 (32C)

  • QFX5200 (48Y)

  • QFX5200 (32C)

  • QFX5210 (64C)

  • QFX5210 (64C-S)

  • QFX5220 (32CD)

  • QFX5220 (128C)

  • QFX10002

  • QFX10008 and QFX10016

QFX Series Switches (Junos OS)

  • QFX5100 (48S)

  • QFX5100 (48T)

  • QFX5100 (24Q)

  • QFX5100 (96S)

  • QFX5110 (48S)

  • QFX5110 (32Q)

  • QFX5120 (48Y)

  • QFX5120 (48T)

  • QFX5120 (48ym)

  • QFX5120 (32C)

  • QFX5200 (48Y)

  • QFX5200 (32C)

  • QFX5210 (64C)

  • QFX5210 (64C-S)

  • QFX5220 (32CD)

  • QFX5220 (128C)

  • QFX10002

  • QFX10008 and QFX10016

QFX Series Switches (Junos OS)

QFX Series switches support both ether-options and gigether-options.

To configure Ethernet configuration options such as loopback, flow-control, auto-negotiation etc., use ether-options.

To configure Forward Error Correction (FEC), use gigether-options.

Not Supported

QFX Series Switches (Junos OS Evolved)

  • QFX5200-32C-L

  • QFX5220-32CD

  • QFX5220-128C

To configure auto-negotiation on management interfaces (re0:mgmt-0), use ether-options.

SRX Series (Junos OS)

  • SRX300

  • SRX550

  • SRX1500

  • SRX4100 and SRX4200

  • SRX4600

  • SRX5400

  • SRX5600

SRX Series (Junos OS)

  • SRX300

  • SRX550

  • SRX1500

  • SRX4100 and SRX4200

  • SRX4600

  • SRX5400

  • SRX5600

SRX Series (Junos OS)

To configure gigabit-Ethernet interfaces (ge-), use gigether-options. To configure ethernet interfaces (et-) and fast ethernet interfaces (fe-), use ether-options.

Default

Enabled.

Options

Note

The auto-negotation and speed statements are not supported on the OCX Series.

loopback-remote—Starting in Junos OS Evolved Release 20.1R1, enable remote loopback.

The remaining statements are explained separately. See CLI Explorer.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Documentation