Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

detect-loc

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 14.2.

Description

Specify whether Ethernet OAM continuity checks are performed for an individual remote maintenance end point (MEP).

When you configure the detect-loc statement at [edit protocols oam ethernet link-fault-management interface interface-name] hierarchy level, a loss-of-continuity (LOC) defect is raised when the peer is not found within a period that is equal to 3 times the current keepalive pdu interval. When an LOC defect is raised, a syslog error message is generated .

Note

When you configure the detect-loc statement at the [edit protocols oam ethernet link-fault-management interface interface-name] hierarchy level, any action-profile configured to bring down the interface is executed when an LOC defect is detected. However, the action-profile is not executed if you have not configured detect-loc statement the detect-loc statement at the [edit protocols oam ethernet link-fault-management interface interface-name] hierarchy level.

To view the current LOC status of an interface, execute the show oam ethernet link-fault-management command.

Default

The MEP does not generate LOC defect messages by default.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.