TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

neighbor (Protocols LDP)

Syntax

neighbor (Protocols LDP) neighbor-address;

Hierarchy Level

[edit logical-systems name protocols ldp],

[edit logical-systems name routing-instances name protocols ldp],

[edit protocols ldp],

[edit routing-instances name protocols ldp]

Release Information

Statement introduced in Junos OS Release 14.2R1 on all platforms.

Description

Configure an LDP targeted neighbor.

LDP sends a targeted hello message to the configured remote neighbor with a targeted request-send-targeted hello message (T) bit set. If the remote neighbor allows receipt of asymmetric hello messages, or if it is configured with the source address as the targeted neighbor, it responds with a targeted hello message. The receipt of a targeted hello message establishes a targeted adjacency with the remote neighbor as described in RFC 5036. Subsequently, a targeted session is established to the remote neighbor.

Options

neighbor-address—IP address of the remote LDP neighbor.

Required Privilege Level

routing