Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

amplifier-chain (IPLC)

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 17.1R1.

Description

Configure the optical supervisory channel (OSC) for the PTX3000 integrated photonic line system and optical ILAs in the amplifier chain. This command includes parameters that enable IP connectivity for the OSC in the line system and amplifier chain.

Options

The options available under the amplifier-chain configuration hierarchy are all associated with configuring and enabling OSC communications over the amplifier chain of the PTX3000 integrated photonic line system. You must specify the following options in order to enable OSC communication, which enables you to configure and manage Juniper Networks optical inline amplifier through the Junos OS CLI:

anchor-iplcConfigure the specified IPLC as the anchor IPLC for the optical supervisory channel (OSC). Use this option to specify one of the IPLC modules in the amplifier chain as the anchor of the chain. You can only have one IPLC anchor in the amplifier chain. This option is only available if the specified slot contains an IPLC base module.
ila ila-numberConfigure a unique identification number for the specified optical ILA. This option is only available if the specified slot contains an IPLC base module and you are using the optical ILA in the amplifier chain.
no-anchor-iplc(Optional) Disable the IPLC from performing anchor queries. You can configure only one IPLC as the anchor of the amplifier chain. You can optionally enable this option on the remote IPLC, that is not performing the anchor function. This option is only available if the specified slot contains an IPLC base module.
osc-ip osc-ipSpecify the IP address of the anchor IPLC. All IP addresses associated with the OSC must be on the same private subnet. This option is only available if the specified slot contains an IPLC base module.
osc-mac osc-macSpecify the MAC address of the anchor IPLC. This option is only available if the specified slot contains an IPLC base module.

All other options are explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.