Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show system statistics

Syntax

Syntax (EX Series Switches)

Syntax (MX Series Router)

Syntax (QFX Series)

Description

Display system-wide protocol-related statistics.

Options

The following are all possible options for the show system statistics command. The available options vary depending on the platform, software release, and operating system (Junos OS and Junos OS Evolved).

Note:

Use the show system statistics ? command to determine the available options.

none

Display system statistics for all the following protocols:

  • arp—Address Resolution Protocol

  • backup - Statistics of backup JunosVM or RE

  • bridge—IEEE 802.1 Bridging

  • clns—Connectionless Network Service

  • esis—End System-to-Intermediate System

  • ethoamcfm—Ethernet OAM protocol for connectivity fault management

  • ethoamlfm—Ethernet OAM protocol for link fault management

  • extended—System statistics for IPv4 and IPv6 traffic

  • icmp—Internet Control Message Protocol

  • icmp6—Internet Control Message Protocol version 6

  • igmp—Internet Group Management Protocol

  • ip—Internet Protocol version 4

  • ip6—Internet Protocol version 6

  • jsr—Juniper Socket Replication

  • jtd - Show jtd statistics

  • mpls—Multiprotocol Label Switching

  • rdp—Reliable Datagram Protocol

  • tcp—Transmission Control Protocol

  • tnp—Trivial Network Protocol

  • ttp—TNP Tunneling Protocol

  • tudp—Trivial User Datagram Protocol

  • udp—User Datagram Protocol

  • vpls—Virtual Private LAN Service

all-members

(EX4200 switches and MX Series routers only) (Optional) Display system statistics for a protocol for all members of the Virtual Chassis configuration.

local

(EX4200 switches and MX Series routers only) (Optional) Display system statistics for a protocol for the local Virtual Chassis member.

member member-id

(EX4200 switches and MX Series routers only) (Optional) Display system statistics for a protocol for the specified member of the Virtual Chassis configuration. For EX4200 switches, replace member-id with a value from 0 through 9. For an MX Series Virtual Chassis, replace member-id with a value of 0 or 1.

Required Privilege Level

view

Sample Output

show system statistics

Release Information

Command introduced before JUNOS Release 7.4.