Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show system statistics ip

 

List of Syntax

Syntax

Syntax (EX Series Switches)

Syntax (TX Matrix Router)

Syntax (TX Matrix Plus Router)

Syntax

Syntax (EX Series Switches)

Syntax (TX Matrix Router)

Syntax (TX Matrix Plus Router)

Release Information

Command introduced before Junos OS Release 7.4.

sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.

Description

Display system-wide IPv4 statistics.

Some of the statistics include, the total number of IPv4 packets received, number of packets destined to dead next hop, number of fragments received and dropped, number of multicast packets dropped, number of Time-triggered Protocol over IP (TTPoIP) packets sent, received, and dropped, and number of raw packets dropped.

Options

noneDisplay system statistics for IPv4.
all-chassis(TX Matrix routers and TX Matrix Plus routers only) (Optional) Display system statistics for IPv4 for all the routers in the chassis.
all-lcc(TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display system statistics for IPv4 for all T640 routers connected to the TX Matrix router. On a TX Matrix Plus router, display system statistics for IPv4 for all T1600 or T4000 routers connected to the TX Matrix Plus router.
all-members(EX4200 switches only) (Optional) Display IPv4 statistics for all members of the Virtual Chassis configuration.
lcc number(TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display system statistics for IPv4 for a specific T640 router that is connected to the TX Matrix router. On a TX Matrix Plus router, display system statistics for IPv4 for a specific router that is connected to the TX Matrix Plus router.

Replace number with the following values depending on the LCC configuration:

  • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.

  • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.

  • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

  • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

local(EX4200 switches only) (Optional) Display IPv4 statistics for the local Virtual Chassis member.
member member-id(EX4200 switches only) (Optional) Display IPv4 statistics for the specified member of the Virtual Chassis configuration. Replace member-id with a value from 0 through 9.
scc(TX Matrix routers only) (Optional) Display system statistics for IPv4 for the TX Matrix router (or switch-card chassis).
sfc number(TX Matrix Plus routers only) (Optional) Display system statistics for IPv4 for the TX Matrix Plus router. Replace number with 0.

Additional Information

By default, when you issue the show system statistics ip command on the primary Routing Engine of a TX Matrix router or a TX Matrix Plus router, the command is broadcast to all the primary Routing Engines of the LCCs connected to it in the routing matrix. Likewise, if you issue the same command on the backup Routing Engine of a TX Matrix or a TX Matrix Plus router, the command is broadcast to all backup Routing Engines of the LCCs that are connected to it in the routing matrix.

Required Privilege Level

view

List of Sample Output

show system statistics ip

show system statistics ip (EX Series Switches)

show system statistics ip (TX Matrix Plus Router)

Sample Output

show system statistics ip

user@host> show system statistics ip

show system statistics ip (EX Series Switches)

user@host> show system statistics ip

show system statistics ip (TX Matrix Plus Router)

user@host> show system statistics ip