Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    show system processes esc-node

    Syntax

    show system processes esc-node

    Release Information

    Command introduced in Junos OS Release 13.3 for PTX5000 routers with CSE2000.

    Command introduced in Junos OS Release 13.3R4 for PTX3000 routers with CSE2000.

    Description

    Display information about software processes that are running on the CSE2000 service card.

    Required Privilege Level

    view

     

    Related Documentation

     

    List of Sample Output

    show system processes esc-node

    Output Fields

    Table 1 lists the output fields for the show system processes esc-node command. Output fields are listed in the approximate order in which they appear.

    Table 1: show system processes esc-node Output Fields

    Field Name

    Field Description

    top

    Shows the system information:

    • The current time.
    • Duration of system up and running time.
    • Number of users logged in.

    load average

    Load averages for the last 1 minute, 5 minutes, and 15 minutes.

    Tasks

    Total the number of processes and their current state.

    Cpu(s)

    CPU utilization in percentage.

    Mem

    Information about physical and virtual memory allocation.

    Swap

    Information about swap memory:

    • Total—Total space on the swap device.
    • Used—Memory swapped to disk.
    • Free—Unused space available on the swap device.

    PID

    Process identifier.

    USER

    User that is running the process.

    PR

    Current priority of the process. A lower number indicates a higher priority.

    NI

    UNIX "niceness" value. A lower number indicates a higher priority.

    VIRT

    The total amount of virtual memory used.

    RES

    Current amount of resident memory.

    SHR

    Amount of shared memory used.

    S

    State of the task. The first letter indicates the run state of the task:

    • S—Sleeping for less than 20 seconds
    • D—In disk or other short-term, uninterruptible wait
    • R—Running
    • Z—Dead (zombie)
    • T—Stopped

    %CPU

    Percentage of CPU used.

    %MEM

    Percentage of memory used.

    TIME+

    Total CPU time used.

    COMMAND

    Command issued.

    Sample Output

    show system processes esc-node

    user@host> show system processes esc-node
    top - 16:20:20 up 15 min,  1 user,  load average: 26.36, 24.85, 15.85
    Tasks: 284 total,  29 running, 249 sleeping,   0 stopped,   6 zombie
    Cpu(s): 75.9%us,  0.7%sy,  0.0%ni, 23.4%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
    Mem:  131878180k total, 28865040k used, 103013140k free,     9800k buffers
    Swap: 134184956k total,        0k used, 134184956k free,    51340k cached
    
      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
     2081 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.41 Timer-1
     2084 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.47 PktProc-4
     2085 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.49 PktProc-5
     2086 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.48 PktProc-6
     2087 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.48 PktProc-7
     2088 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.78 LoadBal-8
     2089 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.79 LoadBal-9
     2091 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.69 JFlow_Export-11
     2092 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.66 PktProc-12
     2093 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.74 PktProc-13
     2094 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.53 PktProc-14
     2095 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.54 PktProc-15
     2096 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.41 PktProc-16
     2101 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.50 PktProc-21
     2102 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.49 PktProc-22
     2103 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.49 PktProc-23
     2104 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.52 PktProc-30
     2105 root      20   0 28.0g  15m 1284 R  100  0.0  14:08.54 PktProc-31
     2082 root      20   0 28.0g  15m 1284 R   98  0.0  14:08.41 Timer-2
     2083 root      20   0 28.0g  15m 1284 R   98  0.0  14:08.46 PktProc-3
     2090 root      20   0 28.0g  15m 1284 R   98  0.0  14:08.65 PktProc-10
     2097 root      20   0 28.0g  15m 1284 R   98  0.0  14:08.45 PktProc-17
     2098 root      20   0 28.0g  15m 1284 R   98  0.0  14:08.46 PktProc-18
     2099 root      20   0 28.0g  15m 1284 R   98  0.0  14:08.47 PktProc-19
     2100 root      20   0 28.0g  15m 1284 R   98  0.0  14:08.47 PktProc-20
     1957 root      20   0 28.0g  15m 1284 R   94  0.0  14:06.66 jtapperd
     1043 root      39  19     0    0    0 R   23  0.0   2:32.58 kipmi0
    13368 juniper   20   0 17464 1400  916 R    4  0.0   0:00.03 top
        1 root      20   0 24480 2372 1356 S    0  0.0   0:04.88 init
        2 root      20   0     0    0    0 S    0  0.0   0:00.05 kthreadd
        3 root      20   0     0    0    0 S    0  0.0   0:00.06 ksoftirqd/0
        6 root      RT   0     0    0    0 S    0  0.0   0:00.00 migration/0
        7 root      RT   0     0    0    0 S    0  0.0   0:00.34 watchdog/0
        8 root      RT   0     0    0    0 S    0  0.0   0:00.00 migration/1
        9 root      20   0     0    0    0 S    0  0.0   0:00.00 kworker/1:0
       10 root      20   0     0    0    0 S    0  0.0   0:00.00 ksoftirqd/1
       11 root      20   0     0    0    0 S    0  0.0   0:00.83 kworker/0:1   
    

    Modified: 2017-01-18