Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show system boot-messages

 

List of Syntax

Syntax

Syntax (EX Series Switches)

Syntax (TX Matrix Router)

Syntax (TX Matrix Plus Router)

Syntax (MX Series Router)

Syntax (QFX Series)

Syntax

Syntax (EX Series Switches)

Syntax (TX Matrix Router)

Syntax (TX Matrix Plus Router)

Syntax (MX Series Router)

Syntax (QFX Series)

Release Information

Command introduced before Junos OS Release 7.4.

Command introduced in Junos OS Release 9.0 for EX Series switches.

sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.

Command introduced in Junos OS Release 11.1 for the QFX Series.

Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.

Description

Display initial messages generated by the system kernel upon startup. These messages are the contents of /var/run/dmesg.boot.

Options

noneDisplay all boot time messages.
all-chassis(TX Matrix routers andTX Matrix Plus routers only) (Optional) Display boot time messages for all of the chassis.
all-lcc(TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display boot time messages for all T640 routers connected to a TX Matrix router. On a TX Matrix Plus router, display boot time messages for all connected T1600 or T4000 LCCs.
all-members(EX4200 switches and MX Series routers only) (Optional) Display boot time messages on all members of the Virtual Chassis configuration.
infrastructure name(QFabric systems only) (Optional) Display boot time messages on the fabric control Routing Engine or fabric manager Routing engines.
interconnect-device name(QFabric systems only) (Optional) Display boot time messages on the Interconnect device.
lcc number(TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display boot time messages for a specific T640 router connected to a TX Matrix router. On a TX Matrix Plus router, display boot time messages for a specific router connected to a TX Matrix Plus router.

Replace number with the following values depending on the LCC configuration:

  • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.

  • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.

  • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

  • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

local(EX4200 switches and MX Series routers only) (Optional) Display boot time messages on the local Virtual Chassis member.
member member-id(EX4200 switches and MX Series routers only) (Optional) Display boot time messages on the specified member of the Virtual Chassis configuration. For EX4200 switches, replace member-id with a value from 0 through 9. For an MX Series Virtual Chassis, replace member-id with a value of 0 or 1.
node-group name(QFabric systems only) (Optional) Display boot time messages on the Node group.
scc(TX Matrix routers only) (Optional) Display boot time messages for the TX Matrix router (or switch-card chassis).
sfc number(TX Matrix Plus routers only) (Optional) Display boot time messages for the TX Matrix Plus router. Replace number with 0.

Additional Information

By default, when you issue the show system boot-messages command on the master Routing Engine of a TX Matrix router or a TX Matrix Plus router, the command is broadcast to all the master Routing Engines of the LCCs connected to it in the routing matrix. Likewise, if you issue the same command on the backup Routing Engine of a TX Matrix or a TX Matrix Plus router, the command is broadcast to all backup Routing Engines of the LCCs that are connected to it in the routing matrix.

Required Privilege Level

view

List of Sample Output

show system boot-messages (TX Matrix Router)

show system boot-messages lcc (TX Matrix Router)

show system boot-messages (TX Matrix Plus Router)

show system boot-messages (QFX3500 Switch)

Sample Output

show system boot-messages (TX Matrix Router)

user@host> show system boot-messages

show system boot-messages lcc (TX Matrix Router)

user@host> show system boot-messages lcc 2

show system boot-messages (TX Matrix Plus Router)

user@host> show system boot-messages

show system boot-messages (QFX3500 Switch)

user@switch> show sytem boot-messages