Command introduced in Junos OS Release 9.3 for EX Series switches.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Command introduced in Junos OS Release 17.2R1 for the ACX5000 line of routers.
Display sFlow configuration information.
Required Privilege Level
List of Sample Outputshow sflow
Table 1 lists the output fields for the show sflow command. Output fields are listed in the approximate order in which they appear.
Table 1: show sflow Output Fields
Status of the feature: Enabled or Disabled.
Reverts back to the previously configured adaptive sample rate. Adaptive fallback is triggered when the number of samples per second for each FPC is less than the sample-limit threshold value. This option is disabled by default.
Number of packets sampled per second. This sample limit cannot be configured and is set to 300 packets per second.
Sample limit threshold
Threshold value that you explicitly configure for adaptive sampling fallback.
Interval at which the sFlow agent polls the interface.
Sample rate egress
Rate at which egress packets are sampled.
Sample rate ingress
Rate at which ingress packets are sampled.
IP address assigned to the sFlow agent.
Source IP address
Source IP address for the sFlow packets.
Agent ID IPv6
IPv6 address assigned to the sFlow agent.
Source IPv6 address
Source IPv6 address for the sFlow packets.
user@host> show sflow
sFlow : Enabled Adaptive fallback : Disabled Sample limit : 300 packets/second Sample limit threshold : 150 packets/second Polling interval : 20 second Sample rate egress : 1:2048: Disabled Sample rate ingress : 1:1000: Enabled Agent ID : 10.93.54.7 Source IP address : 10.93.54.7