Command introduced in Junos OS Release 9.3 for EX Series switches.
Display default sFlow technology configuration information.
Required Privilege Level
List of Sample Outputshow sflow
Table 1 lists the output fields for the show sflow command. Output fields are listed in the approximate order in which they appear.
Table 1: show sflow Output Fields
Level of Output
Status of the feature: enabled or disabled.
Sample rate egress
Rate at which egress packets are sampled.
Sample rate ingress
Rate at which ingress packets are sampled.
Number of packets sampled per second. The sampling limit cannot be configured and is set to 300 packets per second.
Interval at which the sFlow agent polls the interface.
The IP address assigned to the sFlow agent.
Source IP address
The IP address for the sFlow datagram.
sFlow : Enabled Sample rate egress : 1:1000 Sample rate ingress : 1: 2048: Disabled Sample limit : 300 packets/second Polling interval : 20 seconds Agent ID : 10.93.54.7 Source IP address : 10.93.54.7