show route flow validation

List of Syntax

Syntax

Syntax (EX Series Switches)

Syntax

Syntax (EX Series Switches)

Release Information

Command introduced before Junos OS Release 7.4.

Description

Display flow route information.

Options

none—Display flow route information.

brief | detail—(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief.

ip-prefix—(Optional) IP address for the flow route.

logical-system (all | logical-system-name)—(Optional) Perform this operation on all logical systems or on a particular logical system.

table table-name—(Optional) Display flow route information for all routing tables whose name begins with this string (for example, inet.0 and inet6.0 are both displayed when you run the show route flow validation inet command).

Required Privilege Level

view

List of Sample Output

show route flow validation

show route flow validation (IPv6)

Output Fields

Table 1 lists the output fields for the show route flow validation command. Output fields are listed in the approximate order in which they appear.

Table 1: show route flow validation Output Fields

Field Name	Field Description	Level of Output
`routing-table-name`	Name of the routing table (for example, inet.0).	All levels
`prefix`	Route address.	All levels
Active unicast route	Active route in the routing table.	All levels
Dependent flow destinations	Number of flows for which there are routes in the routing table.	All levels
Origin	Source of the route flow.	All levels
Neighbor AS	Autonomous system identifier of the neighbor.	All levels
Flow destination	Number of entries and number of destinations that match the route flow.	All levels
Unicast best match	Destination that is the best match for the route flow.	All levels
Flags	Information about the route flow.	All levels

Sample Output

show route flow validation

user@host> show route flow validation

show route flow validation (IPv6)

user@host> show route flow validation