show poe controller (View)
Command introduced in Junos OS Release 9.5.
Display the status of the Power over Ethernet (PoE) controller.
none—Display general parameters of the PoE software module controller.
Required Privilege Level
Table 1 lists the output fields for the show poe controller command. Output fields are listed in the approximate order in which they appear.
Table 1: show poe controller Output Fields
Identifies the controller.
Specifies the maximum power that can be provided by the SRX Series device to PoE ports.
Specifies the total amount of power allocated to the PoE ports.
Shows the guard band configured on the controller.
Shows the power management mode.
show poe controller
user@host>show poe controller
Controller Maximum Power Guard band Management index power consumption 0 150.0 W 0.0 W 0 W Static