Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show mpls egress-protection

 

Syntax

Release Information

Command introduced in Junos OS Release 11.4R3.

Description

Display information about egress protection.

Note

Use this command on the device configured as the protector PE router to display information about egress protection. If you use this command on the device configured as the primary PE router, no output is displayed.

Options

noneDisplay standard information about egress protection.
brief | detail(Optional) Display the specified level of output.
logical-system (all | logical-system-name)(Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

List of Sample Output

show mpls egress-protection detail (Centralized Protector)

show mpls egress-protection detail (Collocated Protector)

Output Fields

Table 1 describes the output fields for the show mpls egress-protection detail command. Output fields are listed in the approximate order in which they appear.

Table 1: show mpls lsp Output Fields

Field Name

Field Description

Instance

Indicates egress instance name

Type

Indicates type of the VRF. It can be either local-vrf or remote-vrf

RIB

Indicates the edge-protection created routing table

Context-Id

Indicates the context-ID associated with the RIB.

Interface/Enhanced-lookup

Show VT interfaces associated with the backup RIB.

Shows Enhanced-lookup for MX Series 5G Universal Routing Platforms with the Enhanced IP Network Services mode configured using the network-services enhanced-ip statement at the [edit chassis] hierarchy level.

Sample Output

show mpls egress-protection detail (Centralized Protector)

user@host> show mpls egress-protection detail

Sample Output

show mpls egress-protection detail (Collocated Protector)

user@host> show mpls egress-protection detail