Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show isis database

 

List of Syntax

Syntax

Syntax (EX Series Switches and QFX Series)

Syntax

Syntax (EX Series Switches and QFX Series)

Release Information

Command introduced before Junos OS Release 7.4.

Command introduced in Junos OS Release 9.0 for EX Series switches.

Command introduced in Junos OS Release 12.1 for the QFX Series.

Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.

Command introduced in Junos OS Release 15.1X53-D30 for the QFX10002 switch.

Description

Display the entries in the Intermediate System-to-Intermediate System (IS-IS) link-state database, which contains data about PDU packets.

Options

none—Display standard information about IS-IS link-state database entries for all routing instances.
system id—(Optional) Display IS-IS link-state database entries for the specified intermediate system.
brief | detail | extensive—(Optional) Display the specified level of output.
instance instance-name—(Optional) Display IS-IS link-state database entries for the specified routing instance.
level (1 | 2)—(Optional) Display IS-IS link-state database entries for the specified IS-IS level.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

Related Documentation

List of Sample Output

show isis database

show isis database brief

show isis database detail

show isis database extensive (TI-LFA for IS-IS v6)

Output Fields

Table 1 describes the output fields for the show isis database command. Output fields are listed in the approximate order in which they appear. Fields that contain internal IS-IS information useful only in troubleshooting obscure problems are not described in the table. For more details about these fields, contact your customer support representative.

Table 1: show isis database Output Fields

Field Name

Field Description

Level of Output

Interface name

Name of the interface on which the link-state PDU has been received; always IS-IS for this command.

All levels

level

Level of intermediate system:

  • 1—Intermediate system routes within an area; when the destination is outside an area, it routes toward a Level 2 system.

  • 2—Intermediate system routes between areas and toward other ASs.

All levels

LSP ID

Link-state PDU identifier.

All levels

Sequence

Sequence number of the link-state PDU.

All levels

Checksum

Checksum value of the link-state PDU.

All levels

Lifetime (secs)

Remaining lifetime of the link-state PDU, in seconds.

All levels

Attributes

Attributes of the specified database: L1, L2, Overload, or Attached (L1 only).

none brief

# LSPs

Total number of link-state PDUs in the specified link-state database.

none brief

IP prefix

Prefix advertised by this link-state PDU.

detail extensive

IS neighbor

IS-IS neighbor of the advertising system.

detail extensive

IP prefix

IPv4 prefix advertised by this link-state PDU.

detail extensive

V6 prefix

IPv6 prefix advertised by this link-state PDU.

detail extensive

Metric

Metric of the prefix or neighbor.

detail extensive

Header

  • LSP ID—Link state PDU identifier of the header.

  • Length—Header length.

  • Allocated Length—Amount of length available for the header.

  • Router ID—Address of the local routing device.

  • Remaining Lifetime—Remaining lifetime of the link-state PDU, in seconds.

extensive

Packet

  • LSP ID—The identifier for the link-state PDU.

  • Length—Packet length.

  • Lifetime—Remaining lifetime, in seconds.

  • Checksum—The checksum of the link-state PDU.

  • Sequence—The sequence number of the link-state PDU. Every time the link-state PDU is updated, this number increments.

  • Attributes—Packet attributes.

  • NLPID—Network layer protocol identifier.

  • Fixed length—Specifies the set length for the packet.

extensive

TLVs

  • Area Address—Area addresses that the routing device can reach.

  • Speaks—Supported routing protocols.

  • IP router id—ID of the routing device (usually the IP address).

  • IP address—IPv4 address.

  • Hostname—Assigned name of the routing device.

  • IP prefix—IP prefix of the routing device.

  • Metric—IS-IS metric that measures the cost of the adjacency between the originating routing device and the advertised routing device.

  • IP extended prefix—Extended IP prefix of the routing device.

  • IS neighbor—Directly attached neighbor’s name and metric.

  • IS extended neighbor—Directly attached neighbor’s name, metric, IP address, local interface index, and remote interface index.

    The interface indexes enable Junos OS to support unnumbered extensions for IS-IS, as described in RFC 4205.

  • Router Capability—ID of the routing device and flag.

    Note: Router capability also specifies SPRING capability and SPRING algorithm when segment routing is enabled on the routing device.

extensive

Sample Output

show isis database

user@host> show isis database

show isis database brief

The output for the show isis database brief command is identical to that for the show isis database command. For sample output, see show isis database.

show isis database detail

user@host> show isis database logical-system CE3 sisira.00-00 detail

show isis database extensive (TI-LFA for IS-IS v6)

user@host> show isis database extensive