Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show interfaces interface-set (Ethernet Interface Set)

 

Syntax

Release Information

Command introduced in Junos OS Release 8.5.

Description

Display information about the specified gigabit or 10-Gigabit Ethernet interface set.

You can also use the show interfaces interface-set command to display information about agent circuit identifier (ACI) interface sets.

Options

interface-set interface-set-nameDisplay information about the specified Gigabit Ethernet, 10-Gigabit Ethernet, ACI, or ALI interface set.
detail | terse(Optional) Display the specified level of output.

Required Privilege Level

view

List of Sample Output

show interfaces interface-set terse

show interfaces interface-set detail

show interfaces interface-set (ACI Interface Set based on ACI)

show interfaces interface-set (ACI Interface Set based on ACI Trusted Option)

show interfaces interface-set (ACI Interface Set based on ARI Trusted Option)

show interfaces interface-set (ACI Interface Set based on ARI Trusted Option when both ACI and ARI are received)

show interfaces interface-set (ACI Interface Set based on Accept-No-IDs Trusted Option when neither ACI nor ARI is received)

show interfaces interface-set (L2BSA and PPPoE Subscribers)

Output Fields

Table 1 describes the information for the show interfaces interface-set command. Output fields are listed in the approximate order in which they appear.

Table 1: Ethernet show interfaces interface-set Output Fields

Field Name

Field Description

Level of Output

Physical Interface

Interface set

Name of the interface set or sets.

For ACI interface sets, the set name is prefixed with aci-.

For ALI interface sets, the set name is prefixed with the trusted option that the interface set is based on:

  • aci-— The ACI is configured as the trusted option.

  • ari-— The ARI is configured as the trusted option.

  • aci+ari-— Both ACI and ARI are configured as the trusted option.

  • noids-— Neither the ACI nor the ARI is configured as the trusted option and neither ACI nor ARI is received.

All levels

Interface set index

Index number of the interface set.

detail none

ACI VLAN

For ACI interface sets, the string received in DHCP or PPPoE control packets that uniquely identifies the subscriber’s access node and the DSL line on the access node. Only the Agent Circuit ID can be used to create the interface set.

Note: The ACI VLAN field is replaced with the Line Identity field when an ALI interface set is configured with the line-identity autoconfiguration stanza.

detail none

Line Identity

For ALI interface sets, the trusted option received in DHCP or PPPoE control packets that uniquely identifies the subscriber’s access node and the DSL line on the access node. The trusted option can be either or both of the following:

  • Agent Circuit ID—The ACI value

  • Agent Remote ID—The ARI value.

Note: When only accept-no-ids is configured as the trusted option, this field is not displayed.

Note: The Line Identity field is replaced with the ACI VLAN field when an ACI interface set is configured with the agent-circuit-id autoconfiguration stanza.

detail none

PPPoE

Dynamic PPPoE subscriber interface that the router creates using the ACI or ALI interface set.

detail none

Max Sessions

For dynamic PPPoE subscriber interfaces, maximum number of PPPoE logical interfaces that that can be activated on the underlying interface.

detail none

Max Sessions VSA Ignore

For dynamic PPPoE subscriber interfaces, whether the router is configured to ignore (clear) the PPPoE maximum session value returned by RADIUS in the Max-Clients-Per-Interface Juniper Networks VSA [26-143] and restore the PPPoE maximum session value on the underlying interface to the value configured with the max-sessions statement: Off (default) or On.

detail none

Traffic statistics

Number and rate of bytes and packets received and transmitted on the specified interface set.

  • Input bytes, Output bytes—Number of bytes and number of bytes per second received and transmitted on the interface set

  • Input packets, Output packets—Number of packets and number of packets per second received and transmitted on the interface set.

detail

Egress queues supported

Total number of egress queues supported on the specified interface set.

detail

Egress queues in use

Total number of egress queues used on the specified interface set.

detail

Queue counters

Queued packets, Transmitted packets, and Dropped packets statistics for the four forwarding classes.

detail

Members

List of all interface sets or, for ACI interface sets, list of all subscriber interfaces belonging to the specified ACI interface set.

detail none

Sample Output

show interfaces interface-set terse

user@host> show interfaces interface-set terse

show interfaces interface-set detail

user@host> show interfaces interface-set iflset-xe-11/3/0-0 detail

show interfaces interface-set (ACI Interface Set based on ACI)

user@host> show interfaces interface-set

show interfaces interface-set (ACI Interface Set based on ACI Trusted Option)

user@host> show interfaces interface-set

show interfaces interface-set (ACI Interface Set based on ARI Trusted Option)

user@host> show interfaces interface-set

show interfaces interface-set (ACI Interface Set based on ARI Trusted Option when both ACI and ARI are received)

user@host> show interfaces interface-set

show interfaces interface-set (ACI Interface Set based on Accept-No-IDs Trusted Option when neither ACI nor ARI is received)

user@host> show interfaces interface-set

show interfaces interface-set (L2BSA and PPPoE Subscribers)

user@host> show interfaces interface-set