Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show forwarding-options hyper-mode

 

Syntax

Release Information

Command introduced in Junos OS Release 13.3R4.

Description

Display information about the hyper mode feature. After you configure the hyper mode feature, you must reboot the system for the network device (a router or a switch) to reflect the change. For instance, if you have configured hyper mode but not rebooted the system, the Current mode field displays normal while the Configured mode field displays hyper mode.

Note

Since hyper mode is a chassis-specific feature, the show forwarding-options hyper-mode command on a guest network function (GNF) displays the hyper-mode status of the chassis (BSYS), not of the GNF. To know more about GNFs, see Components of Junos Node Slicing.

Required Privilege Level

view

List of Sample Output

show forwarding-options hyper-mode

Output Fields

Table 1 lists the output fields for the show forwarding-options hyper-mode command. Output fields are listed in the order in which they appear.

Table 1: show forwarding-options hyper-mode Output Fields

Field Name

Field Description

Current mode

Displays the current mode, either normal or hyper mode.

Configured mode

Displays the configured mode, either normal or hyper mode.

Sample Output

show forwarding-options hyper-mode

user@host> show forwarding-options hyper-mode