show firewall prefix-action-stats
List of Syntax
Syntax (filter-specific mode)Syntax (term-specific mode)
Syntax (filter-specific mode)
Syntax (term-specific mode)
Release Information
Command introduced before Junos OS Release 7.4.
logical-system option introduced in Junos OS Release 9.3.
Description
Display prefix action statistics about configured firewall filters.
If you clear statistics for firewall filters that are applied to MPCs and that also use the prefix-action action on matched packets, wait at least 5 seconds before you enter the show firewall prefix-action-stats command. A 5-second pause between issuing the clear firewall and show firewall prefix-action-stats commands avoids a possible timeout of the show firewall prefix-action-stats command.
By default, policers operate in term-specific mode.
See Filter-Specific Policer Overview for information about how to configure policers in filter-specific mode.
Options
Required Privilege Level
view
Related Documentation
List of Sample Output
show firewall prefix-action-statsOutput Fields
Table 1 lists the output fields for the show firewall prefix-action-stats command. Output fields are listed in the approximate order in which they appear.
Table 1: show firewall prefix-action-stats Output Fields
Field Name | Field Description |
|---|---|
Filter | Filter name. Filters configured for logical systems include the name of the filter prefixed with the two underscore characters (__) and the name of the logical system (for example, __ls1/filter1). |
Sample Output
show firewall prefix-action-stats
user@host> show firewall prefix-action-stats
filter test prefix-action act1-term1 from 0 to 9Filter: test Counters: Name Bytes Packets act1-0 0 0 act1-1 0 0 act1-2 0 0 act1-3 0 0 act1-4 0 0 act1-5 0 0 act1-6 0 0 act1-7 0 0 act1-8 0 0 act1-9 0 0 Policers: Name Bytes Packets act1-0 0 0 act1-1 0 0 act1-2 0 0 act1-3 0 0 act1-4 0 0 act1-5 0 0 act1-6 0 0 act1-7 0 0 act1-8 0 0 act1-9 0 0