show evpn multicast-snooping assisted-replication multihomed-peers
Syntax
Release Information
Command introduced in Junos OS Release 18.4R2 and 19.4R1.
Description
Display multihoming peer neighbor addresses and corresponding multihomed Ethernet segment information for an assisted replication (AR) leaf device.
When devices with AR enabled operate in extended AR mode (see Extended AR Mode for Multihomed Ethernet Segments), an ingress AR leaf device uses the information this command shows to replicate and forward multicast traffic to all other AR leaf devices that are its multihoming peers (have attached access devices with the same multihomed Ethernet segment identifier [ESI]). The ingress AR leaf device also sends the traffic to an AR replicator device that replicates it to other devices in the EVPN network that are not multihoming peers with the AR leaf device.
QFX Series devices must use extended AR mode to support AR in an EVPN network with a Virtual Extensible LAN (VXLAN) overlay and multihomed Ethernet segments.
Output for this command is only available when IGMP snooping is enabled.
Options
You can only enable IGMP snooping for the default-switch EVPN instance on QFX Series switches in an EVPN-VXLAN environment, so you don’t need to use the instance option because this command only displays information for the default-switch instance.
Required Privilege Level
view
Related Documentation
List of Sample Output
show evpn multicast-snooping assisted-replication multihomed-peersshow evpn multicast-snooping assisted-replication multihomed-peers (extensive)
Output Fields
Table 1 describes the output fields for the show evpn multicast-snooping assisted-replication multihomed-peers command. Output fields are listed in the approximate order in which they appear.
Table 1: show evpn multicast-snooping assisted-replication multihomed-peers Output Fields
Field Name | Field Description |
---|---|
Instance | EVPN instance name. |
Neighbor Address | Multihoming peer IP address. |
Nexthop Index | Ingress replication next hop for the multihoming peer AR leaf device in the Neighbor Address output field. |
Interface | Interface name to reach the multihoming peer device in the Neighbor Address output field. |
Local Multi-homed ESIs | (Displayed with extensive option only) Multihomed Ethernet segments shared with the multihoming peer in the Neighbor Address output field. |
Sample Output
show evpn multicast-snooping assisted-replication multihomed-peers
user@device> show evpn multicast-snooping assisted-replication
multihomed-peers
Instance: default-switch Neighbor Address Nexthop Index Interface 10.0.1.2 1841 vtep.32782
show evpn multicast-snooping assisted-replication multihomed-peers (extensive)
user@device> show evpn multicast-snooping assisted-replication
multihomed-peers extensive
Instance: default-switch Neighbor address: 10.0.1.2 Nexthop Index: 1841 Interface: vtep.32782 Local Multi-homed ESIs 00:11:22:33:44:55:66:77:88:99 00:11:22:33:44:55:66:77:88:aa