Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show dvmrp prunes

 

Syntax

Release Information

Note

Distance Vector Multicast Routing Protocol (DVMRP) was deprecated in Junos OS Release 16.1. Although DVMRP commands continue to be available and configurable in the CLI, they are no longer visible and are scheduled for removal in a subsequent release.

Command introduced before Junos OS Release 7.4.

Description

Display information about active Distance Vector Multicast Routing Protocol (DVMRP) prune messages.

Options

noneDisplay received and transmitted DVMRP prune information.
all(Optional) Display information about all received and transmitted prune messages.
rx(Optional) Display information about received prune messages.
tx(Optional) Display information about transmitted prune messages.
logical-system (all | logical-system-name)(Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

List of Sample Output

show dvmrp prunes

Output Fields

Table 1 describes the output fields for the show dvmrp prunes command. Output fields are listed in the approximate order in which they appear.

Table 1: show dvmrp prunes Output Fields

Field Name

Field Description

Group

Group address.

Source prefix

Prefix for the prune.

Timeout

How long until the prune message expires, in seconds.

Neighbor

Neighbor to which the prune was sent or from which the prune was received.

Sample Output

show dvmrp prunes

user@host> show dvmrp prunes