show dvmrp neighbors

Syntax

Release Information

Note

Distance Vector Multicast Routing Protocol (DVMRP) was deprecated in Junos OS Release 16.1. Although DVMRP commands continue to be available and configurable in the CLI, they are no longer visible and are scheduled for removal in a subsequent release.

Command introduced before Junos OS Release 7.4.

Description

Display information about Distance Vector Multicast Routing Protocol (DVMRP) neighbors.

Options

none—(Same as logical-system all) Display information about DVMRP neighbors.

logical-system (all | logical-system-name)—(Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

List of Sample Output

show dvmrp neighbors

Output Fields

Table 1 describes the output fields for the show dvmrp neighbors command. Output fields are listed in the approximate order in which they appear.

Table 1: show dvmrp neighbors Output Fields

Field Name	Field Description
Neighbor	Address of the neighboring DVMRP router.
Interface	Interface through which the neighbor is reachable.
Version	Version of DVMRP that the neighbor is running, in the format `majorminor`.
Flags	Information about the neighbor: 1—One way. The local router has seen the neighbor, but the neighbor has not seen the local router. G—Neighbor supports generation ID. L—Neighbor is a leaf router. M—Neighbor supports mtrace. N—Neighbor supports netmask in prune messages and graft messages. P—Neighbor supports pruning. S—Neighbor supports SNMP.
Routes	Number of routes learned from the neighbor.
Timeout	How long until the DVMRP neighbor information times out, in seconds.
Transitions	Number of generation ID changes that have occurred since the local router learned about the neighbor.

Sample Output

show dvmrp neighbors

user@host> show dvmrp neighbors