Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display configured CLI settings.
This command has no options.
Required Privilege Level
List of Sample Outputshow cli
Table 1 lists the output fields for the show cli command. Output fields are listed in the approximate order in which they appear.
Table 1: show cli Output Fields
Capability to complete a partial command entry when you type a space or a tab: on or off.
Maximum time that an individual session can be idle before the user is logged out from the router or switch. When this feature is enabled, the number of minutes is displayed. Otherwise, the state is disabled.
CLI is set to prompt you to restart the router or switch after upgrading the software: on or off.
Number of lines of text that the terminal screen displays.
Number of characters in a line on the terminal screen.
CLI is operating in
Date and time format for the timestamp. If the timestamp is not set, the state is disabled.
CLI working directory
Pathname of the working directory.
user@host> show cli
CLI complete-on-space set to on CLI idle-timeout disabled CLI restart-on-upgrade set to on CLI screen-length set to 47 CLI screen-width set to 132 CLI terminal is 'vt100' CLI is operating in enhanced mode CLI timestamp disabled CLI working directory is '/var/tmp'