show chassis environment pem
List of Syntax
SyntaxSyntax (ACX4000 Router)
Syntax (TX Matrix Routers)
Syntax (TX Matrix Plus Routers)
Syntax (MX Series Router)
Syntax (PTX Series Router)
Syntax (MX104 Universal Routing Platforms)
Syntax (MX10003 , MX204, MX10008, OCX Series, EX9251, and EX9253 devices)
Syntax (QFX Series)
Syntax
show chassis environment pem
<slot>
Syntax (ACX4000 Router)
show chassis environment pem
Syntax (TX Matrix Routers)
show chassis environment pem
<lcc number | scc>
<slot>
Syntax (TX Matrix Plus Routers)
show chassis environment pem
<lcc number | sfc number>
<slot>
Syntax (MX Series Router)
show chassis environment pem
<slot>
<all-members>
<local>
<member member-id>
Syntax (PTX Series Router)
show chassis environment pem
<slot>
<all-members>
<local>
<member member-id>
Syntax (MX104 Universal Routing Platforms)
show chassis environment pem
<slot>
<satellite [fpc-slot slot-id |device-alias
alias-name]
Syntax (MX10003 , MX204, MX10008, OCX Series, EX9251, and EX9253
devices)
show chassis environment pem
<slot>
Syntax (QFX Series)
show chassis environment pem
<slot (interconnect-device name slot ) | (node-device name)>
Release Information
Command introduced before Junos OS Release 7.4.
satellite option introduced in Junos OS Release 14.2R3.
Description
Display Power Entry Module (PEM) environmental status information.
The new high-capacity (4100W) enhanced DC PEM on MX960 routers includes a new design that can condition the input voltage. This results in the output voltage differing from the input voltage. The earlier generation of DC PEMs coupled the input power directly to the output, thereby making it safe to assume that the output voltage was equal to the input voltage.
Options
none—Display environmental
information about both PEMs. For the TX Matrix router, display
environmental information about the PEMs, the TX Matrix router, and
its attached T640 routers. For the TX Matrix Plus router, display
environmental information about the PEMs, the TX Matrix Plus router,
and its attached routers.
all-members—(MX Series
routers only) (Optional) Display environmental information about the
PEMs in all the member routers of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display
chassis environmental information about the PEMs in the Interconnect
device.
lcc number—(TX Matrix router and TX Matrix Plus router only)
(Optional) Line-card chassis number.
Replace number with the following values depending on the LCC configuration:
0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.
0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.
0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.
local—(MX Series routers
only) (Optional) Display environmental information about the PEM in
the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display environmental
information about the PEM in the specified member of the Virtual Chassis
configuration. Replace member-id with a value
of 0 or 1.
node-device name—(QFabric systems only) (Optional) Display chassis
environmental information about the PEMs in the Node device.
satellite [fpc-slot slot-id | device-alias alias-name]—(Junos Fusion only)(Optional) Display environmental information
about the PEM in the specified satellite device in a Junos Fusion,
or for all satellite devices in the Junos Fusion if no satellite devices
are specified.
scc—(TX Matrix
routers only) (Optional) Display environmental information about the
PEM in the TX Matrix router (or switch-card chassis).
sfc—(TX Matrix Plus
routers only) (Optional) Display environmental information about the
PEM in the TX Matrix Plus router (or switch-fabric chassis).
slot —(Optional) Display environmental information about an individual
PEM. Replace slot with 0 or 1.
Required Privilege Level
view
Related Documentation
List of Sample Output
show chassis environment pem (M40e Router)show chassis environment pem (M120 Router)
show chassis environment pem (M160 Router)
show chassis environment pem (M320 Router)
show chassis environment pem (MX150)
show chassis environment pem (MX104 Router)
show chassis environment pem (MX240 Router)
show chassis environment pem (MX480 Router)
show chassis environment pem (MX960 Router)
show chassis environment pem (MX10003 Router)
show chassis environment pem (MX204 Router)
show chassis environment pem (MX10008 Router)
show chassis environment pem (PTX10016 Router)
show chassis environment pem (T320 Router)
show chassis environment pem (T640 Router)
show chassis environment pem (T4000 Router)
show chassis environment pem (T640/T1600/T4000 Routers With Six-Input DC Power Supply)
show chassis environment pem lcc (TX Matrix Routing Matrix)
show chassis environment pem scc (TX Matrix Routing Matrix)
show chassis environment pem sfc (TX Matrix Plus Routing Matrix)
show chassis environment pem lcc (TX Matrix Plus Routing Matrix)
show chassis environment pem node-device (QFabric System)
show chassis environment pem (QFX Series and OCX Series)
show chassis environment pem (QFX 10016)
show chassis environment pem interconnect-device (QFabric System)
show chassis environment pem (EX9251 Switches)
show chassis environment pem (EX9253 Switches)
show chassis environment pem (PTX1000 Packet Transport Routers)
Output Fields
Table 1 lists the output fields for the show chassis environment pem command. Output fields are listed in the approximate order in which they appear.
Table 1: show chassis environment pem Output Fields
Field Name | Field Description |
|---|---|
PEMslotstatus | Number of the PEM slot. |
State | Status of the PEM. |
Temperature | Temperature of the air flowing past the PEM. |
AC Input | Status of the AC input for the specified component |
AC Output | Status of the AC output for the specified component. |
DC input | Status of the DC input for the specified component. |
DC output | Status of the DC output for the specified component. |
Load | (Not available on M40e or M160 routers) Information about the load on supply, in percentage of rated current being used. |
Voltage | (M120, M160, M320, T640, T1600, TX Matrix, and TX Matrix Plus routers only) Information about voltage supplied to the PEM. (MX104 routers only) Information about voltage supplied by the PEM to the system. |
Current | (T640, T1600, TX Matrix, and TX Matrix Plus routers only) Information about the PEM current. |
Power | (T640, T1600, TX Matrix, and TX Matrix Plus routers only) Information about the PEM power. |
SCG/CB/SIB | (T640, T1600, TX Matrix, and TX Matrix Plus routers only) SONET Clock Generator/Control Board/Switch Interface Board. |
FAN | (T640, T1600, and T4000 routers with six-input DC power supply only) Information about the DC output to the fan. |
Sample Output
show chassis environment pem (M40e Router)
user@host> show chassis environment pemPEM 0 status: State Online Temperature OK AC input OK DC output OK
show chassis environment pem (M120 Router)
user@host> show chassis environment pemPEM 0 status:
State Online
Temperature OK
DC Input: OK
DC Output: OK
Load Less than 20 percent
Voltage:
48.0 V input 52864 mV
48.0 V fan supply 41655 mV
3.3 V 3399 mV
PEM 1 status:
State Online
Temperature OK
DC Input: OK
DC Output: OK
Load Less than 20 percent
Voltage:
48.0 V input 54537 mV
48.0 V fan supply 42910 mV
3.3 V 3506 mV
show chassis environment pem (M160 Router)
user@host> show chassis environment pemPEM 0 status:
State Online
Temperature OK
DC input OK
DC output OK
Load Less than 20 percent
Voltage:
48.0 V input 54833 mV
48.0 V fan supply 50549 mV
8.0 V bias 8239 mV
5.0 V bias 5006 mV
show chassis environment pem (M320 Router)
user@host> show chassis environment pemPEM 2 status:
State Online
Temperature OK
DC input OK
Load Less than 40 percent
48.0 V input 51853 mV
48.0 V fan supply 48877 mV
8.0 V bias 8449 mV
5.0 V bias 4998 mV
PEM 3 status:
State Online
Temperature OK
DC input OK
Load Less than 40 percent
48.0 V input 51717 mV
48.0 V fan supply 49076 mV
8.0 V bias 8442 mV
5.0 V bias 4998 mV
show chassis environment pem (MX150)
user@host> show chassis environment pemFPC 0 PEM 0 status: State Online Airflow Front to Back Temperature OK
show chassis environment pem (MX104 Router)
user@host> show chassis environment pemPEM 0 status:
State Online
Temperature OK
DC Output: OK
Voltage:
12.0 V output 12281 mV
3.3 V output 3353 mV
PEM 1 status:
State Empty
show chassis environment pem (MX240 Router)
user@host> show chassis environment pemPEM 0 status: State Online Temperature OK DC Output: OK PEM 1 status: State Online Temperature OK DC Output: OK
show chassis environment pem (MX480 Router)
user@host> show chassis environment pemPEM 0 status: State Online Temperature OK DC Input: OK DC Output: OK Voltage: PEM 1 status: State Online Temperature OK DC Input: OK DC Output: OK Voltage:
show chassis environment pem (MX960 Router)
user@host> show chassis environment pemPEM 2 status: State Present PEM 3 status: State Online Temperature OK DC Output: OK
show chassis environment pem (MX10003 Router)
user@host> show chassis environment pem
PEM 0 status:
State Online
Airflow Front to Back
Temperature OK 34 degrees C / 93 degrees F
Temperature OK 26 degrees C / 78 degrees F
Temperature OK 24 degrees C / 75 degrees F
Firmware version 0x22
Cooling Fan 8752 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 26 312 10
PEM 1 status:
State Online
Airflow Front to Back
Temperature OK 35 degrees C / 95 degrees F
Temperature OK 26 degrees C / 78 degrees F
Temperature OK 25 degrees C / 77 degrees F
Firmware version 0x22
Cooling Fan 8480 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 27 324 11
PEM 2 status:
State Online
Airflow Front to Back
Temperature OK 37 degrees C / 98 degrees F
Temperature OK 29 degrees C / 84 degrees F
Temperature OK 25 degrees C / 77 degrees F
Firmware version 0x22
Cooling Fan 8656 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 25 300 10
PEM 3 status:
State Online
Airflow Front to Back
Temperature OK 35 degrees C / 95 degrees F
Temperature OK 26 degrees C / 78 degrees F
Temperature OK 25 degrees C / 77 degrees F
Firmware version 0x22
Cooling Fan 8448 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 26 312 10
PEM 4 status:
State Empty
PEM 5 status:
State Emptyshow chassis environment pem (MX204 Router)
user@host> show chassis environment pem
PEM 0 status:
State Empty
PEM 1 status:
State Online
Airflow Front to Back
Temperature OK 48 degrees C / 118 degrees F
Temperature OK 51 degrees C / 123 degrees F
Fan Sensor 5400 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
11.94 16 191 29
show chassis environment pem (MX10008 Router)
user@host> show chassis environment pemPEM 0 status:
State Online
Airflow Front to Back
Temperature OK 29 degrees C / 84 degrees F
Firmware version 0x36
Fan 0 5880 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 104 1248 46
PEM 1 status:
State Online
Airflow Front to Back
Temperature OK 27 degrees C / 80 degrees F
Firmware version 0x36
Fan 0 5940 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 104 1248 46
PEM 2 status:
State Online
Airflow Front to Back
Temperature OK 30 degrees C / 86 degrees F
Firmware version 0x36
Fan 0 5940 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 105 1260 46
PEM 3 status:
State Present
PEM 4 status:
State Present
PEM 5 status:
State Presentshow chassis environment pem (PTX10016 Router)
user@host> show chassis environment pemPEM 0 status:
State Online
Airflow Front to Back
Temperature OK 21 degrees C / 69 degrees F
Firmware version 0x36
Fan 0 5760 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 51 612 22
PEM 1 status:
State Online
Airflow Front to Back
Temperature OK 23 degrees C / 73 degrees F
Firmware version 0x36
Fan 0 5760 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 52 624 23
PEM 2 status:
State Online
Airflow Front to Back
Temperature OK 23 degrees C / 73 degrees F
Firmware version 0x36
Fan 0 5760 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 51 612 22
PEM 3 status:
State Online
Airflow Front to Back
Temperature OK 21 degrees C / 69 degrees F
Firmware version 0x36
Fan 0 5760 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 51 612 22
PEM 4 status:
State Online
Airflow Front to Back
Temperature OK 22 degrees C / 71 degrees F
Firmware version 0x36
Fan 0 5760 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 52 624 23
PEM 5 status:
State Online
Airflow Front to Back
Temperature OK 24 degrees C / 75 degrees F
Firmware version 0x36
Fan 0 5700 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 51 612 22
PEM 6 status:
State Online
Airflow Front to Back
Temperature OK 21 degrees C / 69 degrees F
Firmware version 0x36
Fan 0 5700 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 50 600 22
show chassis environment pem (T320 Router)
user@host> show chassis environment pem PEM 0 status: State Online Temperature OK DC input: OK
show chassis environment pem (T640 Router)
user@host> show chassis environment pem PEM 0 status:
State Online
Temperature 22 degrees C / 71 degrees F
AC input: OK
DC output: Voltage Current Power Load
FPC 0 56875 606 34 4
FPC 1 57016 525 29 3
FPC 2 0 0 0 0
FPC 3 0 0 0 0
FPC 4 0 0 0 0
FPC 5 0 0 0 0
FPC 6 57158 1581 90 12
FPC 7 0 0 0 0
SCG/CB/SIB 56750 1125 63 5
show chassis environment pem (T4000 Router)
user@host> show chassis environment pem PEM 0 status:
State Online
Temperature 33 degrees C / 91 degrees F
DC Input: OK
Voltage(V) Current(A) Power(W) Load(%)
INPUT 0 54.625 9.812 535 22
INPUT 1 54.625 10.250 559 23
INPUT 2 55.125 0.125 6 0
INPUT 3 54.500 10.062 548 22
INPUT 4 54.750 9.375 513 21
INPUT 5 54.750 10.187 557 23
DC Output Voltage(V) Current(A) Power(W) Load(%)
FPC 0 55.750 10.125 564 37
FPC 1 51.625 0.000 0 0
FPC 2 52.000 0.000 0 0
FPC 3 55.062 10.437 574 38
FPC 4 52.125 0.000 0 0
FPC 5 55.000 9.375 515 34
FPC 6 55.187 9.687 534 35
FPC 7 51.437 0.000 0 0
SCG/CB/SIB 55.375 15.750 872 35
FAN 54.562 14.750 804 42
show chassis environment pem (T640/T1600/T4000 Routers With Six-Input DC Power Supply)
user@host> show chassis environment pem PEM 1 status:
State Online
Temperature 36 degrees C / 96 degrees F
DC Input: OK
Voltage(V) Current(A) Power(W) Load(%)
INPUT 0 0.000 0.000 0 0
INPUT 1 54.875 3.812 209 27
INPUT 2 55.375 3.937 218 29
INPUT 3 54.625 3.750 204 27
INPUT 4 55.125 3.375 186 24
INPUT 5 55.125 3.375 186 24
DC Output Voltage(V) Current(A) Power(W) Load(%)
FPC 0 52.312 0.000 0 0
FPC 1 52.687 0.000 0 0
FPC 2 52.812 0.000 0 0
FPC 3 55.812 7.062 394 52
FPC 4 52.625 0.000 0 0
FPC 5 52.625 0.000 0 0
FPC 6 52.750 0.000 0 0
FPC 7 52.750 0.000 0 0
SCG/CB/SIB 55.937 11.937 667 55
FAN 55.812 4.937 275 36show chassis environment pem lcc (TX Matrix Routing Matrix)
user@host> show chassis environment pem 0 lcc
0lcc0-re0:
--------------------------------------------------------------------------
PEM 0 status:
State Present
Temperature 27 degrees C / 80 degrees F
DC input: Check
DC output: Voltage Current Power Load
FPC 0 0 0 0 0
FPC 1 0 0 0 0
FPC 2 0 0 0 0
FPC 3 0 0 0 0
FPC 4 0 0 0 0
FPC 5 0 0 0 0
FPC 6 0 0 0 0
FPC 7 0 0 0 0
SCG/CB/SIB 0 0 0 0
show chassis environment pem scc (TX Matrix Routing Matrix)
user@host> show chassis environment pem sccscc-re0:
--------------------------------------------------------------------------
PEM 1 status:
State Online
Temperature 24 degrees C / 75 degrees F
DC input: OK
DC output: Voltage Current Power Load
SIB 0 0 0 0 0
SIB 1 0 0 0 0
SIB 2 0 0 0 0
SIB 3 56550 0 0 0
SIB 4 55958 6912 386 51
show chassis environment pem sfc (TX Matrix Plus Routing Matrix)
user@host> show chassis environment pem sfc
0sfc0-re0:
--------------------------------------------------------------------------
PEM 0 status:
State Online
Temperature 35 degrees C / 95 degrees F
DC Input: OK
DC Output Voltage Current Power Load
Channel 0 53820 14140 761 59
Channel 1 53550 12720 681 53
Channel 2 53840 12930 696 54
Channel 3 53690 14990 804 63
Channel 4 53620 15070 808 63
Channel 5 53900 14820 798 62
Channel 6 54120 5020 271 21 show chassis environment pem lcc (TX Matrix Plus Routing Matrix)
user@host> show chassis environment lcc 0
lcc0-re1:
--------------------------------------------------------------------------
PEM 0 status:
State Online
Temperature 38 degrees C / 100 degrees F
DC Input: OK
DC Output Voltage Current Power Load
FPC 0 0 0 0 0
FPC 1 0 0 0 0
FPC 2 0 0 0 0
FPC 3 0 0 0 0
FPC 4 56408 7575 427 56
FPC 5 0 0 0 0
FPC 6 56266 7956 447 59
FPC 7 56283 6100 343 45
SCG/CB/SIB 55916 8950 500 41
PEM 1 status:
State Present
Temperature 35 degrees C / 95 degrees F
DC Input: Check
DC Output Voltage Current Power Load
FPC 0 0 0 0 0
FPC 1 0 0 0 0
FPC 2 0 0 0 0
FPC 3 0 0 0 0
FPC 4 0 0 0 0
FPC 5 0 0 0 0
FPC 6 0 0 0 0
FPC 7 0 0 0 0
SCG/CB/SIB 0 0 0 0 show chassis environment pem node-device (QFabric System)
user@switch> show chassis environment pem node-device
node1FPC 0 PEM 0 status:
State Check
Airflow Front to Back
Temperature OK
AC Input: OK
DC Output Voltage(V) Current(A) Power(W) Load(%)
12 10 120 18
FPC 0 PEM 1 status:
State Online
Airflow Back to Front
Temperature OK
AC Input: OK
DC Output Voltage(V) Current(A) Power(W) Load(%)
11 10 110 17show chassis environment pem (QFX Series and OCX Series)
user@switch> show chassis environment pemFPC 0 PEM 1 status:
State Online
Airflow Front to Back
Temperature OK
AC Input: OK
DC Output Voltage(V) Current(A) Power(W) Load(%)
12 17 204 31 show chassis environment pem (QFX 10016)
user@router> show chassis environment pem 1
PEM 1 status:
State Present
Input Voltage(V) Current(A) Power(W)
INP 1 229.9 0.4 96.6
INP 2 233.7 0.4 98.2
Health check Information:
Status: Scheduled
Last Result: Pass
Last Execution: 2019-04-23 15:09:54
Next Scheduled Run: 2019-04-23 15:32:59
show chassis environment pem interconnect-device (QFabric System)
user@switch> show chassis environment pem interconnect-device
IC1 1IC1 PEM 1 status:
State Online
Airflow Front to Back
Temperature OK
AC Input: OK
DC Output Voltage(V) Current(A) Power(W) Load(%)
12 18 216 33
show chassis environment pem (EX9251 Switches)
user@switch> show chassis environment pemPEM 0 status:
State Present
PEM 1 status:
State Online
Airflow Front to Back
Temperature OK 36 degrees C / 96 degrees F
Temperature OK 35 degrees C / 95 degrees F
Fan Sensor 5940 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
11.85 17 201 30show chassis environment pem (EX9253 Switches)
user@switch> show chassis environment pemPEM 0 status:
State Online
Airflow Front to Back
Temperature OK 56 degrees C / 132 degrees F
Temperature OK 46 degrees C / 114 degrees F
Temperature OK 28 degrees C / 82 degrees F
Firmware version 04.10
Cooling Fan 9056 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 47 564 19
PEM 1 status:
State Present
PEM 2 status:
State Empty
PEM 3 status:
State Empty
PEM 4 status:
State Present
PEM 5 status:
State Online
Airflow Front to Back
Temperature OK 61 degrees C / 141 degrees F
Temperature OK 49 degrees C / 120 degrees F
Temperature OK 28 degrees C / 82 degrees F
Firmware version 04.10
Cooling Fan 8656 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 51 612 21
show chassis environment pem (PTX1000 Packet Transport Routers)
user@router> show chassis environment pem
PEM 0 status:
State Online
Airflow Front to Back
Temp Sensor 0 OK 22 degrees C / 71 degrees F
Temp Sensor 1 OK 23 degrees C / 73 degrees F
Fan 0 9184 RPM
Fan 1 7936 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12 24 288 18
PEM 2 status:
State Online
Airflow Front to Back
Temp Sensor 0 OK 22 degrees C / 71 degrees F
Temp Sensor 1 OK 26 degrees C / 78 degrees F
Fan 0 9056 RPM
Fan 1 7808 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12 24 288 18
On PTX1000 Packet Transport Routers, you cannot view the show chassis environment pem output at the PEM slot level, by using the command show chassis environment pem slot.