Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


show chassis environment cip


Syntax (TX Matrix Plus Router)

Release Information

Command introduced in Junos OS Release 9.6 for the TX Matrix Plus router.


(TX Matrix Plus router only) Display environmental information about the Connector Interface Panel (CIP).


noneDisplay environmental information about all the CIP.
slotDisplay environmental information about a specific CIP. Replace slot with a value from 0 through 1.

Required Privilege Level


List of Sample Output

Output Fields

Table 1 lists the output fields for the show chassis environment cip command. Output fields are listed in the approximate order in which they appear.

Table 1: show chassis environment cip Output Fields

Field Name

Field Description


State of the CIP:

  • Online Active: CIP is online and there is active control plane data transfer between the SFC and LCCs in the routing matrix.

  • Online Inactive: CIP is online, but inactive.

  • Offline: CIP is offline.


Temperature of the CIP in Celsius (C) and Fahrenheit (F).


Information about the voltage supplied to the CIP. The left column displays the required power, in volts. The right column displays the measured power, in millivolts.

Note: In case of CIP power failure, one the following reasons is displayed.

  • Voltage failure—Indicates the CIP voltage failure.

  • Sensor failure—Indicates the CIP voltage sensor device failure.

Bus Revision

Bus revision number.

show chassis environment cip (TX Matrix Plus Router)

user@host> show chassis environment cip